Fiberglass Pool Construction

1. Find Utility Lines and Know Zoning Laws

When you’re looking to start a fiberglass pool construction, determine where you cannot place your pool. Avoid electric and plumbing lines, your septic tank, and the drain field. You can’t build near or on top of these because you’ll cut off service to your home. Also, be aware of zoning laws; obtain a permit from your local government and provide pool plans so that they can approve.

2. Plan for Additions

If you plan on adding a deck, patio, or other outdoor feature down the road, ensure you have plenty of space. Many homeowners build these at the same time as the in-ground pool. Work with a contractor first to mark space for hardscapes and decking so that pool construction doesn’t encroach.

3. Balance Visibility & Privacy

You don’t want your in-ground pool to feel totally closed off; at the same time, you don’t want to sacrifice your privacy. First, consider what’s already in place. If you have a lot of landscaping, the foliage can easily shield against prying eyes. Also, you can add a fence for additional cover, though you need to plan it before building the pool.

Midwest Pool Builders & Stonecrafters are experts in Fiberglass Pool Construction, which means we offer a wide variety of Fiberglass pools. This means that you’re sure to find something which suits your lifestyle and personality. Take a look at some of the ideas we have available.

Fiberglass Pool Construction – After The Project Is Finished

What maintenance is required for Fiberglass Pools?

Owning a pool offers countless hours of fun and exercise, but it also requires diligent care. Whatever your reason for wanting a pool, you probably have questions about the kind of maintenance it requires. Below are the answers to a few common questions property owners have about their in-ground pools so that you know what to expect.

What does chlorine do?

Pools need to be treated with chlorine for safety purposes. It kills most of the germs that cause recreational water illnesses, such as Cryptosporidium. Maintain your chlorine at a level between 1 and 3 parts per million (ppm). Test these levels twice a week and run chlorine continuously through a chemical feeding device to maintain a constant level.

Do I need to brush my fiberglass pool?

An automatic pool cleaner can do most of the cleaning work, but some elbow grease is required. Brush the pool once a week to remove algae growth as it appears, as well as any other small particles like pollen. Include the walls, benches, floor, and tile rising above the water. Areas with limited circulation, such as behind ladders and in corners, need special care.

Should in-ground pools be drained each winter?

There is no need to drain your pool each winter. The water serves as a barrier between the bottom of the pool and cold temperatures to keep it from cracking. Instead, install a pool cover to provide another barrier of insulation and keep debris out.

Can I swim in my pool after a shock treatment?

A shock treatment is recommended after heavy use to kill bacteria and algae and to restore the water’s clarity. It involves dumping a large number of chemicals into the water, so wait for 8 to 12 hours before getting in again. The optimal time to shock the pool is in the evening so that it can work overnight without sunlight affecting the chemical levels.